Nvidia Jetson TX1 and TX2
Contents
Introduction
The ERIKA3 RTOS can be run as a guest OS of the Jailhouse hypervisor on the Nvidia Tegra Jetson TX1 board.
Such support has been developed in the context of the HERCULES European project.
It has been also shown through a [https://www.youtube.com/watch?v=skIcAkXfNWQ&t=3s YouTube video).
This section explains how to build and install Jailhouse on the TX1 target and how to create an ERIKA3 guest (AKA Jailhouse inmate).
Platform setup
Linux distribution
Use Nvidia Jetpack 3.1 to flash the Linux distribution by Nvidia onto the TX1 platform. JetPack is a tool that runs on an Ubuntu host machine and installs Linux on the TX1 platform. The host machine and the platform must be connected through the OTG USB cable.
Serial console
Please, refer to the README available on the Jailhouse tree on our GitHub for information about serial port setup or static IP configuration.
Jailhouse support
For installing Jailhouse on the TX1 platform, please refer to the README available on the Jailhouse tree on our GitHub.
ERIKA3 on Jailhouse
Please, refer to the following documents:
