TI AWR1642 build with RT-Druid

From ERIKA WIKI
Revision as of 14:01, 25 February 2019 by E.Guidieri (talk | contribs) (→‎RT-Druid Template Project)
Jump to: navigation, search

Synopsys

This guide illustrates how to build and run a first ERIKA Enterprise v3 application for AWR1642BOOST

  • Using the Eclipse environment (this wiki page)
    • OIL File editing integrated in Eclipse
    • No integrated debugger support (you will need CCS v8 or Lauterbach Trace32 (for lauterbach no specific instruction are provided))

Prerequisites

Please remember to install CCS v8 and MMWAVE-SDK 02_01_00_04 to obtain the full functionality described in this tutorial.

Additional information on prerequisites is available at the Quick Start Guide - Prerequisites.


RT-Druid Eclipse IDE

  • Double-click the eclipse.exe application located in the eclipse folder extracted from the RT-Druid Package. Then, the workspace selection window will appear as shown in the following figure:
Figure 1: RT-Druid Eclipse IDE workspace selection.
  • Browse the file-system to select Workspace folder and then click on the OK button to let the RT-Druid Eclipse IDE start as shown in the following figure:
Figure 2: RT-Druid Eclipse IDE welcome.
  • Click on the Welcome tab-sheet close button to show the default RT-Druid Eclipse IDE C/C++ perspective as shown in the following figure:
Figure 3: RT-Druid Eclipse IDE C/C++ perspective.

RT-Druid Template Project

  • Click on File->New->RT-Druid v3 Oil and C/C++ Project menu entry as shown in the following figure:
Figure 4: RT-Druid v3 Oil and C/C++ Project.
  • The RT-Druid C/C++ Project Wizard will open as shown in the following figure:
Figure 5: RT-Druid C/C++ Project Wizard.
  • Type the name of the project in the Project name text-box (e.g., TI_AWR1642_example).
  • Make sure the Cygwin GCC toolchain is selected and then click on the Next button.
  • The wizard will show the window to select a project template as shown in the following figure:
Figure 6: RT-Druid Project Template Wizard.
  • Click on Create a project using one of these templates check-box to let the Template Wizard to show the available templates as shown in the following figure:
Figure 7: RT-Druid Available Templates Wizard.
  • Expand the Cortex-R and TI AWR1642 entries and choose the desired template to instantiate: Full Demo.
  • Finally, click on the Finish button to instantiate an RT-Druid Eclipse project from a chosen template as shown in the following figure:
Figure 8: RT-Druid Eclipse Project.
Retrieved from "http://www.erika-enterprise.com/wiki/index.php?title=TI_AWR1642_build_with_RT-Druid&oldid=1195"