Difference between revisions of "Nvidia Jetson TX1 and TX2"
From ERIKA WIKI
| Line 7: | Line 7: | ||
This section explains how to build and install Jailhouse on the TX1 target and how to create an ERIKA3 guest (AKA inmate). | This section explains how to build and install Jailhouse on the TX1 target and how to create an ERIKA3 guest (AKA inmate). | ||
| − | === | + | === Platform setup === |
| − | + | Use [https://developer.nvidia.com/embedded/jetpack Nvidia Jetpack 3.1] to flash the Linux distribution by Nvidia onto the TX1 platform. | |
| − | |||
| + | === Jailhouse support on TX1 === | ||
| + | For installing Jailhouse on the TX1 platform, please refer to the README available on the [https://github.com/evidence/linux-jailhouse-tx1 Jailhouse tree on our GitHub]. | ||
Revision as of 13:30, 23 February 2018
Introduction
The ERIKA3 RTOS can be run as a guest OS of the Jailhouse hypervisor on the Nvidia Tegra Jetson TX1 board.
Such support has been developed in the context of the HERCULES European project.
It has been also shown through a [https://www.youtube.com/watch?v=skIcAkXfNWQ&t=3s YouTube video).
This section explains how to build and install Jailhouse on the TX1 target and how to create an ERIKA3 guest (AKA inmate).
Platform setup
Use Nvidia Jetpack 3.1 to flash the Linux distribution by Nvidia onto the TX1 platform.
Jailhouse support on TX1
For installing Jailhouse on the TX1 platform, please refer to the README available on the Jailhouse tree on our GitHub.
ERIKA3 on Jailhouse
Please, refer to the following documents:
