Latest revision as of 11:13, 13 February 2019

Introduction

ERIKA3 supports x86-64 processors.
The support on GitHub is currently limited to the RTOS running as a guest OS of the Jailhouse hypervisor.

The CPU_DATA object must be set to X86_64.

In addition to the generic settings for the CPU_DATA, there is also a PLATFORM attribute that, by default, is set to JAILHOUSE

Example of a CPU_DATA section:

   CPU_DATA = X86_64 {
     PLATFORM = JAILHOUSE;
     ...
   };

The BOARD_DATA object can be set to a specific x86 board.

For example:

   BOARD_DATA = VBOX_3610;

The support has been successfully tested on the following platforms:

Information about how to download and install a bare-metal x86 toolchain is available in this page.

In case you need support for bare-metal hardware or other hypervisors, please contact us.

@@ Line 21: / Line 21: @@
 == BOARD_DATA ==
-The '''BOARD_DATA''' object must be set to the specific x86 board.
+The '''BOARD_DATA''' object can be set to a specific x86 board.
-Example of a BOARD_DATA section:
+For example:
      BOARD_DATA = VBOX_3610;
 = Tutorials =
 The support has been successfully tested on the following platforms:
-* [[VBOX-3610]]
+* [[VBOX-3610|Jailhouse on SINTRONES VBOX-3610]]
+* Xen on Advantech ARK-3520P-U7A1E
+* Xen on B&R APC910
+Information about how to download and install a bare-metal x86 toolchain is available in [[Bare-metal_x86-64_image|this page]].
 In case you need support for bare-metal hardware or other hypervisors, please [http://www.erika-enterprise.com/index.php/contacts.html contact us].