Hi everybody,
does anyone know about an ERIKA port for the RH850/F1L device?
Best regards,
Armin
ERIKA Port for RH850/F1L ?
Moderator: paolo.gai
Re: ERIKA Port for RH850/F1L ?
Hi!
As long as I know, there is currently no porting for that micro. But we have one for the RX200 (but it is not automotive grade),
http://erika.tuxfamily.org/wiki/index.p ... esas_RX200
Are you interested in the development of a porting for that one?
Ciao,
PJ
As long as I know, there is currently no porting for that micro. But we have one for the RX200 (but it is not automotive grade),
http://erika.tuxfamily.org/wiki/index.p ... esas_RX200
Are you interested in the development of a porting for that one?
Ciao,
PJ
Re: ERIKA Port for RH850/F1L ?
yes please!
Re: ERIKA Port for RH850/F1L ?
Porting in progress.
-
karthikshanmugam
- Newbie
- Posts: 1
- Joined: Fri May 06, 2016 1:40 pm
Re: ERIKA Port for RH850/F1L ?
Any word on the Erika port for RH850?
Best regards,
Karthik
Best regards,
Karthik
Re: ERIKA Port for RH850/F1L ?
Hello guys,
sorry for the late reply. I wasn't working on that topic for some time now, but I had at least some working version.
You can have a look at this, example projects included. It was made for EE 2.6.
Supports IAR and GHS.
Still this is no finished port.
Regarding any issue, please let me know.
Regards
sorry for the late reply. I wasn't working on that topic for some time now, but I had at least some working version.
You can have a look at this, example projects included. It was made for EE 2.6.
Supports IAR and GHS.
Still this is no finished port.
Regarding any issue, please let me know.
Regards
- Attachments
-
- EE_RH850_Port.zip
- Preliminary RH850/F1L and RH850/F1H (single core support) port
- (674.76 KiB) Downloaded 509 times
Re: ERIKA Port for RH850/F1L ?
Hi!
Thanks for the post! We are going to look at it in the next days (most probably after the Christmas holidays)!!!
Ciao,
PJ
Thanks for the post! We are going to look at it in the next days (most probably after the Christmas holidays)!!!
Ciao,
PJ
Re: ERIKA Port for RH850/F1L ?
Dear Nils,
I apologize if it took sooo long to reply. We reviewed the code and we have to say it has a really good quality!
We have two questions about the code you posted:
- Is there a reason why you used only "standard IRQs" and not the exceptions of the RH850? We would have expected the usage of exceptions for the ISR1.
- Did you also ported the porting examples while doing and testing the porting? If so, and if you still have them, we could commit also those.
Let me know (privately by e-mail at pj "at" evidence "dot" eu "dot" com) if you want to commit them directly on the SVN or if we should commit them on your behalf (in that case we'll put a note in the SVN comments).
Finally, are you going to be present at Embedded World 2017? it could be a good occasion to meet in person. We are at booth 4-545.
Ciao!
PJ
I apologize if it took sooo long to reply. We reviewed the code and we have to say it has a really good quality!
We have two questions about the code you posted:
- Is there a reason why you used only "standard IRQs" and not the exceptions of the RH850? We would have expected the usage of exceptions for the ISR1.
- Did you also ported the porting examples while doing and testing the porting? If so, and if you still have them, we could commit also those.
Let me know (privately by e-mail at pj "at" evidence "dot" eu "dot" com) if you want to commit them directly on the SVN or if we should commit them on your behalf (in that case we'll put a note in the SVN comments).
Finally, are you going to be present at Embedded World 2017? it could be a good occasion to meet in person. We are at booth 4-545.
Ciao!
PJ