TCP/IP Flex Application Note.
Posted: Wed May 21, 2008 10:52 am
Hi,
this is just a remark on the application note concerning the TCP/IP application note for Flex and Multibus boards.
The correct jumper position in order to run the example is:
JP1 = 1-2
Jp11= 1-2
JP2, JP3, JP4 = non collegati
JP5, JP6, JP7, JP8, JP9, JP10 = not connected or connected to SPI2 (JP5, JP6, JP7: 1-2)
JP12, JP13, JP14, JP15 = 2-3 (all, near RJ45 conn)
Francesco.
this is just a remark on the application note concerning the TCP/IP application note for Flex and Multibus boards.
The correct jumper position in order to run the example is:
JP1 = 1-2
Jp11= 1-2
JP2, JP3, JP4 = non collegati
JP5, JP6, JP7, JP8, JP9, JP10 = not connected or connected to SPI2 (JP5, JP6, JP7: 1-2)
JP12, JP13, JP14, JP15 = 2-3 (all, near RJ45 conn)
Francesco.