Installation not working

Forum related to the FLEX boards

Moderator: paolo.gai

Locked
Tk23
Newbie
Posts: 2
Joined: Thu Nov 29, 2012 4:17 pm

Installation not working

Post by Tk23 » Thu Nov 29, 2012 4:21 pm

Hello,

i installed like described at wiki page..
I get the error on startup, and if i try to use the UDP blocks I get an error like the Message on the Picture.

What I´m doing wrong?

Im on win7x64 Scicos 4.4.1 and ScicosLab Pack 11.1 and 11.0
Attachments
Unbenannt.PNG
Unbenannt.PNG (64.77 KiB) Viewed 12920 times

erikadds
Newbie
Posts: 45
Joined: Wed May 12, 2010 9:41 am

Re: Installation not working

Post by erikadds » Thu Nov 29, 2012 5:48 pm

Dear Tk23,
please check the installation steps at:
http://erika.tuxfamily.org/wiki/index.p ... os_diagram

For example, If you didn't install MSVC++ 2008 express edition you cannot link the DLL libraries of the block and you have the errors.

I hope this help you.
Please, the next time select the correct forum ('ScicosLab and Scicos-FLEX code generation').
Kind regards,
DDS

Tk23
Newbie
Posts: 2
Joined: Thu Nov 29, 2012 4:17 pm

Re: Installation not working

Post by Tk23 » Thu Nov 29, 2012 5:59 pm

Thanks for the anwer. I read MSVC++ 2010 express edition.... Now trying with 2008

Locked