PINS in ADC
Posted: Tue Apr 14, 2009 3:07 pm
Hi, I would like to use an external circuit that will provide the voltage that I want the ADC to receive and convert.
I toke a look on your example and I understood how it works.
just want to know if I just need to connect the voltage to one of the pins, for example PIN 34, Temperature sensor (AN12/RB12);
Isn\'t necessary to give a reference voltage?
thanks,
BMFS
I toke a look on your example and I understood how it works.
just want to know if I just need to connect the voltage to one of the pins, for example PIN 34, Temperature sensor (AN12/RB12);
Isn\'t necessary to give a reference voltage?
thanks,
BMFS