Flex Installation Difficulties

Forum related to the FLEX boards

Moderator: paolo.gai

Locked
Carotti
Newbie
Posts: 5
Joined: Wed Jun 11, 2008 11:20 am

Flex Installation Difficulties

Post by Carotti » Wed Jun 11, 2008 11:43 am

Hi everyone!

I was so impressed with what you guys are doing that I purchased some FLEX boards to try capturing some functions from SCILAB. I have previously used PIC and MPLAB using ICD2.

I have tried very carefully to follow the install instructions in the tutorials but have not yet got a successful compile. I am sure I have missed something simple but do not know what.

I am trying to perform the CodeGen from SCILAB using the led_sin example but no ELF is generated. I get the following message in the command window

make*** No rule to make target \'/cygdrive/c/programs/MICRO~1/MPLABC30/support/h/p33FJ256MC710.h, needed by \'frommchp/p33FJ256MC710.h Stop.
-------------------------------------------------
DONE... Application successfully compiled!

a PDF file showing the full log is attached.

Any ideas would be greatly appreciated.

Once I find a solution I would gladly help with updating the documentation if necessary....

Many thanks,

Dave

Carotti
Newbie
Posts: 5
Joined: Wed Jun 11, 2008 11:20 am

Re:Flex Installation Difficulties

Post by Carotti » Wed Jun 11, 2008 11:46 am

PDF did not upload so here is a text file instead
Attachments

[The extension txt has been deactivated and can no longer be displayed.]


paolo.gai
Administrator
Posts: 875
Joined: Thu Dec 07, 2006 12:11 pm

Re:Flex Installation Difficulties

Post by paolo.gai » Wed Jun 11, 2008 2:32 pm

Hi,

Thanks for the compliments :-)

which version of the compiler did you installed? please be aware that MPLAB 8.10 and C30 3.10 does NOT yet work with ERIKA (Microchip has moved the file locations... grrrr)

Please use MPLAB 8.0 and C30 3.02. The newest version will be supported with the next version, which will be out hopefully in 2 weeks before the Flex training course in Pisa!

bye

PJ

Carotti
Newbie
Posts: 5
Joined: Wed Jun 11, 2008 11:20 am

Re:Flex Installation Difficulties

Post by Carotti » Wed Jun 11, 2008 2:49 pm

PJ,

many thanks for the prompt response and that idea. I am indeed using later versions for other MICROCHIP work.

I will install the tool versions that you suggest for the flex work and let everyone know how I get on.

Many thanks and keep up the good work!

Dave.

desmomito
Newbie
Posts: 27
Joined: Wed Mar 05, 2008 4:03 pm

Re:Flex Installation Difficulties

Post by desmomito » Thu Jun 12, 2008 10:55 am

Hi,
where did you find the C30 3.02 version ? On microchip website I\'ve just found 3.01 and 3.01b.


Thanks,
Pasquale.

paolo.gai
Administrator
Posts: 875
Joined: Thu Dec 07, 2006 12:11 pm

Re:Flex Installation Difficulties

Post by paolo.gai » Thu Jun 12, 2008 11:24 am

you are right... 3.01... any version before the latest works...

PJ

Carotti
Newbie
Posts: 5
Joined: Wed Jun 11, 2008 11:20 am

Re:Flex Installation Difficulties

Post by Carotti » Fri Jun 13, 2008 9:06 am

Everyone, here is a quick update. I have now successfully generated .elf when using these versions: -

MPLAB IDE: 8.00
C30: 2.05
SCILAB: 4.1.2
OS: VISTA ultimate SP1 (!)

Note I did have problems when I installed the C30 V3.01 update over the C30 V2.05 install so regressed to V2.05. I have not gone back to check this out because I don\'t want to break something that is now working. Will now attempt an install on XP SP3.

Dave.:)

Locked