error from building \"TCP/IP Flex Application Note\"

Forum related to the FLEX boards

Moderator: paolo.gai

Locked
benq51c
Newbie
Posts: 6
Joined: Tue Nov 27, 2007 3:16 pm

error from building \"TCP/IP Flex Application Note\"

Post by benq51c » Fri Jun 06, 2008 10:23 am

hi,
I received
c:\\program files\\microchip\\mplab c30\\bin\\pic30-coff-ld.exe: cannot open linker script file C:\\Programmi\\Microchip\\MPLAB C30\\support\\gld\\p33FJ256GP710.gld error when I build it in MPLAB.

it seem that C:\\Programmi is wrong dir. can somebody help me.:(
Top
paolo.gai
Administrator
Posts: 875
Joined: Thu Dec 07, 2006 12:11 pm

Re:error from building \"TCP/IP Flex Application No

Post by paolo.gai » Fri Jun 06, 2008 11:52 am

The Microchip project file has the directories entered by Nino when we made the example. You need to create another MPLAB Project, which in that case will have the right directories...

PJ
Top
benq51c
Newbie
Posts: 6
Joined: Tue Nov 27, 2007 3:16 pm

Re:error from building

Post by benq51c » Fri Jun 06, 2008 1:05 pm

paolo.gai wrote:
The Microchip project file has the directories entered by Nino when we made the example. You need to create another MPLAB Project, which in that case will have the right directories...

PJ
thank you very much!
it is now successfully built and programmed in Flexboard, but how can I test the demo program. the LED from the LAN connector is still in power off state when I connect with my PC.do I need to setup somethings?:huh:
Top
paolo.gai
Administrator
Posts: 875
Joined: Thu Dec 07, 2006 12:11 pm

Re:error from building

Post by paolo.gai » Fri Jun 06, 2008 3:34 pm

did you set the jumpers on the Multibus board? there is another post in the forum about the same topic...

bye

PJ
Top
benq51c
Newbie
Posts: 6
Joined: Tue Nov 27, 2007 3:16 pm

Re:error from building

Post by benq51c » Fri Jun 13, 2008 12:53 pm

paolo.gai wrote:
did you set the jumpers on the Multibus board? there is another post in the forum about the same topic...

bye

PJ
yes,but LED from the Ethernet connector is still in power off state.:(
Top
benq51c
Newbie
Posts: 6
Joined: Tue Nov 27, 2007 3:16 pm

Re:error from building

Post by benq51c » Fri Jun 13, 2008 12:53 pm

paolo.gai wrote:
did you set the jumpers on the Multibus board? there is another post in the forum about the same topic...

bye

PJ
yes,but LED from the Ethernet connector is still in power off state.:(
Top
benq51c
Newbie
Posts: 6
Joined: Tue Nov 27, 2007 3:16 pm

Re:error from building

Post by benq51c » Fri Jun 13, 2008 12:54 pm

paolo.gai wrote:
did you set the jumpers on the Multibus board? there is another post in the forum about the same topic...

bye

PJ
yes,but LED from the Ethernet connector is still in power off state.:(
Top
paolo.gai
Administrator
Posts: 875
Joined: Thu Dec 07, 2006 12:11 pm

Re:error from building

Post by paolo.gai » Fri Jun 13, 2008 9:00 pm

Hi,

hmmmm... No idea what could be.

Did you solder the ethernet connector yourself or did you got the multibus board with the connector already soldered?

PJ
Top
benq51c
Newbie
Posts: 6
Joined: Tue Nov 27, 2007 3:16 pm

Re:error from building

Post by benq51c » Fri Jun 20, 2008 11:12 am

I got the multibus board with the connector already soldered. I have set the jumpers of base board following the doc. flex_refman_0_29.pdf on page 19. and set the jumpers of multibus following the topic \" TCP/IP Flex Application Note \" . but it still does not work.

my question is, in which condition, the LED of the Ethernet connector will light? should I run the demo program in order to let the LED light?
Top
Locked

Return to “FLEX (closed)”