SAMC 21J18 with ERIKA Enterprise

Forum related to ERIKA Enterprise and RT-Druid version 3

Moderator: paolo.gai

Post Reply
ChayMa
Newbie
Posts: 41
Joined: Tue Mar 26, 2019 5:44 pm

SAMC 21J18 with ERIKA Enterprise

Post by ChayMa » Mon Aug 19, 2019 11:17 am

Hello,

I am working on SAMC 21 Project and I would like to use Erika Enterprise as an RTOS.
SAMC 21 has the ARM processor Cortex-M0+ . This later, is it supported by Erika Enterprise ?

Thank you

Best regards,

paolo.gai
Administrator
Posts: 872
Joined: Thu Dec 07, 2006 12:11 pm

Re: SAMC 21J18 with ERIKA Enterprise

Post by paolo.gai » Mon Aug 19, 2019 1:43 pm

Dear ChayMa,

The specific microcontroller you are talking about is not yet supported by ERIKA3...

Ciao,

PJ

ChayMa
Newbie
Posts: 41
Joined: Tue Mar 26, 2019 5:44 pm

Re: SAMC 21J18 with ERIKA Enterprise

Post by ChayMa » Mon Aug 19, 2019 2:16 pm

Dear paolo.gai,

Thank you for your response.
I think isame for ERIKA 2. !

Best regards,

ChayMa
Newbie
Posts: 41
Joined: Tue Mar 26, 2019 5:44 pm

Re: SAMC 21J18 with ERIKA Enterprise

Post by ChayMa » Thu Jan 21, 2021 5:10 pm

Hello again,

Any update about the ERIKA 3 support for Cortex M0+ ?

Thank you in advance.
best regards,

paolo.gai
Administrator
Posts: 872
Joined: Thu Dec 07, 2006 12:11 pm

Re: SAMC 21J18 with ERIKA Enterprise

Post by paolo.gai » Fri Jan 22, 2021 9:36 am

Dear ChayMa,

Not for now unfortunately. However there will be substantial changes to the ERIKA3 project this year (I cannot announce them yet). So likely during the year there may be additional Cortex M support.

Ciao,

PJ

ChayMa
Newbie
Posts: 41
Joined: Tue Mar 26, 2019 5:44 pm

Re: SAMC 21J18 with ERIKA Enterprise

Post by ChayMa » Fri Jan 22, 2021 3:38 pm

Hi,

Thank you for your response.
Other question please. How about Cortex M0, Is it supported?

best regards,

paolo.gai
Administrator
Posts: 872
Joined: Thu Dec 07, 2006 12:11 pm

Re: SAMC 21J18 with ERIKA Enterprise

Post by paolo.gai » Sun Jan 24, 2021 10:57 am

We did not get much request for Cortex M0 support recently, but things may change in the near future...

Regards,

Paolo

ChayMa
Newbie
Posts: 41
Joined: Tue Mar 26, 2019 5:44 pm

Re: SAMC 21J18 with ERIKA Enterprise

Post by ChayMa » Wed Jan 27, 2021 10:01 am

Hello,

How could I contact you officially? The project requires ERIKA OS under SAMC21 (Cortex M0+). is there any support you can provide?
For example : The necessary modification in ERIKA OS files ? (Where it would be done)

Thank you in advance.

Best regards,

Post Reply