AURIX TC26x B-step with RT_Druid v2
Posted: Mon Apr 01, 2019 4:19 pm
Hello,
I am new user of AURIX and ERIKA OS. I am working on a project that requires the use of the board TC264 B-step along side with ERIKA OS.
I am using the Free Entry Tool Chain by HIGHTEC and the RT_Druid v2 (2.8) to generate the .oil file for ERIKA OS.
As I said I am newbie in this field and I want some examples or tutorials to get used to the board with the RTOS. Unfortunately, I didn't find any examples for the TC26x series. So, I used the example provided by HIGHTEC for the TC26x B-step Series ( Time demo ) and I add an RT_Druid builder to the project.
But after building the project, I get an error. The following picture presents the error.
Can you please help me. Thank you.
Best regards,
I am new user of AURIX and ERIKA OS. I am working on a project that requires the use of the board TC264 B-step along side with ERIKA OS.
I am using the Free Entry Tool Chain by HIGHTEC and the RT_Druid v2 (2.8) to generate the .oil file for ERIKA OS.
As I said I am newbie in this field and I want some examples or tutorials to get used to the board with the RTOS. Unfortunately, I didn't find any examples for the TC26x series. So, I used the example provided by HIGHTEC for the TC26x B-step Series ( Time demo ) and I add an RT_Druid builder to the project.
But after building the project, I get an error. The following picture presents the error.
Can you please help me. Thank you.
Best regards,