Microchip MPLAB-X - Integration on Windows

Synopsys

This guide illustrates how to integrate ERIKA Enterprise v3 in Microchip MPLAB-X IDE.

Preconditions

• Download the MPLAB-X Scripts package from ERIKA Enterprise v3 download page.
• Extract the downloaded package (ee3_MPLAB-X_scripts_YYYYMMDD_ghNN.zip) in "C:\Evidence" folder.
• Rename extracted "ee3_MPLAB-x" folder in "erika3".
• Download and Install MPLAB-X IDE v4.05 for windows.
• Download and Install MPLAB XC16 C Compiler v1.33 for windows.
• dsPIC33EV 5V CAN-LIN STARTER KIT board connected to PC via USB cable.

MPLAB-X IDE User Makefile Project

• Click on File->New Project... menu entry as shown in the following figure:

Figure 1: MPLAB-X IDE New Project.

• The MPLAB-X IDE Project Wizard will open as shown in the following figure:

Figure 2: MPLAB-X IDE Project Wizard.

• Select Microchip Embedded folder into Categories Panel.

• Select User Makefile Project project into Projects Panel.

• Click on Next > button.

• The wizard will show the window to select the Device as shown in the following figure:

Figure 3: MPLAB-X IDE Device Selection.

• Select the correct device: 16-bit DSCs (dsPIC33) and dsPIC33EV256GM106.

• Click on Next > button to let the Wizard to show the available debugging tools as shown in the following figure:

Figure 4: MPLAB-X IDE Tool Selection.

• Select the correct tool: PICKit 3 Starter Kit....

• Click on Next > button to let the Wizard to show the project name and folder as shown in the following figure:

Figure 5: MPLAB-X IDE Project Name and Folder Selection.

• Fill the Project Name field (e.g erika3app).

• Browse the Project Loaction (e.g. C:\Evidence\MPLABXProjects)

• Click on Next > button to create User Makefile as shown in the following figure:

Figure 6: MPLAB-X IDE User Makefile Creation.

• Fill Working Directory field with . (dot).

• Fill Build command and Debug build command fields with ee3_app.bat.

• Fill Clean command" field with ee3_clean.bat.

• Fill Image name and Debug image name fields with out/erika3app.elf.

• Finally, click on the Finish button to instantiate the MPLAB-X IDE Project from with chosen options as shown in the following figure:

Figure 7: MPLAB-X IDE Project.

• Click on Files tab-sheet of the upper-left panel to show the Project Files as shown in the following figure:

Figure 8: MPLAB-X IDE Project Files.

• Copy the following script files from C:\Evidence\erika3\mplabx folder into project folder as shown in the following figure:
  • ee3_app.bat
  • ee3_cfg.bat
  • ee3_clean.bat

Figure 9: MPLAB-X IDE Script Files.

• Copy example source files from any C:\Evidence\erika3\examples sub-folder into project folder as shown in the following figure:

Figure 10: MPLAB-X IDE Example Source Files.

• To build the ERIKA Enterprise v3 example click on Production->Build Main Project menu entry as shown in the following figure:

Figure 11: MPLAB-X IDE Build Main Project.

• The build project process starts as shown in the following figure:

Figure 12: MPLAB-X IDE Build Project Process.

• Finally the build process ends successfully as shown in the following figure:

Figure 13: MPLAB-X IDE Project Built Successfully.

• To debug the ERIKA Enterprise v3 example click on Debug->Debug Main Project menu entry as shown in the following figure:

Figure 14: MPLAB-X IDE Debug Main Project.

• The build project process starts as shown in the following figure:

Figure 12: MPLAB-X IDE Build Project Process.

• The build process ends successfully as shown in the following figure:

Figure 13: MPLAB-X IDE Project Built Successfully.

• The Device Voltage dialog window may appear as shown in the in the following figure:

Figure 15: MPLAB-X IDE Device Voltage Dialog.

• Click on the OK button to let program the device as shown in the following figure:

Figure 16: MPLAB-X IDE Device Programming.

• Finally the programming process ends successfully and the application runs as shown in the following figure:

Figure 17: MPLAB-X IDE Application Running.

• Click into Pause button to debug the application as shown in the following figure:

Figure 18: MPLAB-X IDE Application Debug.

MPLAB-X IDE Standalone Project

• Click on File->New Project... menu entry as shown in the following figure:

Figure 1: MPLAB-X IDE New Project.

• The MPLAB-X IDE Project Wizard will open as shown in the following figure:

Figure 19: MPLAB-X IDE Project Wizard.

• Select Microchip Embedded" folder into Categories" Panel.

• Select Standalone Project project into Projects Panel.

• Click on Next > button.

• The wizard will show the window to select the Device as shown in the following figure:

Figure 3: MPLAB-X IDE Device Selection.

• Select the correct device: 16-bit DSCs (dsPIC33) and dsPIC33EV256GM106.

• Click on Next > button to let the Wizard to show the available debugging tools as shown in the following figure:

Figure 4: MPLAB-X IDE Tool Selection.

• Select the correct tool: PICKit 3 Starter Kit....

• Click on Next > button to let the Wizard to show the available compilers as shown in the following figure:

Figure 20: MPLAB-X IDE Compiler Selection.

• Select the correct compiler: XC16 (v1.33).

• Click on Next > button to let the Wizard to show the project name and folder as shown in the following figure:

Figure 21: MPLAB-X IDE Project Name and Folder Selection.

• Fill the Project Name field (e.g erika3app).

• Browse the Project Loaction (e.g. C:\Evidence\MPLABXProjects)

• Finally, click on the Finish button to instantiate the MPLAB-X IDE Project from with chosen options as shown in the following figure:

Figure 22: MPLAB-X IDE Standalone Project.

• Click on Files tab-sheet of the upper-left panel to show the Project Files as shown in the following figure:

Figure 8: MPLAB-X IDE Project Files.

• Copy the following script files from C:\Evidence\erika3\mplabx folder into project folder as shown in the following figure:
  • ee3_pull.bat
  • ee3_cfg.bat
  • ee3_clean.bat

Figure 23: MPLAB-X IDE Script Files.

• Copy example source files from any C:\Evidence\erika3\examples sub-folder into project folder as shown in the following figure:

Figure 24: MPLAB-X IDE Example Source Files.

• Right-Click on the ee_pull.bat" file in the project and select Run context-menu entry to pull ERIKA Enterprise v3 into project as shown in the following figure:

Figure 25: MPLAB-X IDE ERIKA Pull Run.

• The pull process starts as shown in the following figure:

Figure 26: MPLAB-X IDE ERIKA Pull Process.

• The pull process ends successfully as shown in the following figure:

Figure 27: MPLAB-X IDE ERIKA Pull Successfully.

• Click on Projects tab-sheet of the upper-left panel to show the Project Folders.

• Right-Click on the Source Files" folder in the project and select Add Existing Item... context-menu entry to add source files into project build system as shown in the following figure:

Figure 28: MPLAB-X IDE Project Source Files Add Existing Item...

• From the project root select application source files and then click Select button as shown in the following figure:

Figure 29: MPLAB-X IDE Project Application Source Files Adding...

• The application source files will be added to project source files folder as shown in the following figure:

Figure 30: MPLAB-X IDE Project Application Source Files Added.

• Right-Click on the Source Files" folder in the project and select Add Existing Item... context-menu entry to add source files into project build system as shown in the following figure:

Figure 28: MPLAB-X IDE Project Source Files Add Existing Item...

• From the project out sub-folder select ee_applcfg.c source files and then click Select button as shown in the following figure:

Figure 31: MPLAB-X IDE Project Application Configuration File Adding...

• The application configuration source files will be added to project source files folder as shown in the following figure:

Figure 32: MPLAB-X IDE Project Application Configuration Source Files Added.

• Right-Click on the Source Files" folder in the project and select Add Existing Item... context-menu entry to add source files into project build system as shown in the following figure:

Figure 28: MPLAB-X IDE Project Source Files Add Existing Item...

From the project erika/src sub-folder select all *.c and all *.S source files and then click Select button as shown in the following figure:

Figure 33: MPLAB-X IDE Project ERIKA v3 Source File Adding...

• The ERIKA Enterprise v3 source files will be added to project source files folder as shown in the following figure:

Figure 34: MPLAB-X IDE Project ERIKA v3 Source Files Added.

• To build the ERIKA Enterprise v3 example click on Production->Build Main Project menu entry as shown in the following figure:

Figure 11: MPLAB-X IDE Build Main Project.

• The build project process starts as shown in the following figure:

Figure 12: MPLAB-X IDE Build Project Process.

• Finally the build process ends successfully as shown in the following figure:

Figure 13: MPLAB-X IDE Project Built Successfully.

• To debug the ERIKA Enterprise v3 example click on Debug->Debug Main Project menu entry as shown in the following figure:

Figure 14: MPLAB-X IDE Debug Main Project.

• The build project process starts as shown in the following figure:

Figure 12: MPLAB-X IDE Build Project Process.

• The build process ends successfully as shown in the following figure:

Figure 13: MPLAB-X IDE Project Built Successfully.

• The Device Voltage dialog window may appear as shown in the in the following figure:

Figure 15: MPLAB-X IDE Device Voltage Dialog.

• Click on the OK button to let program the device as shown in the following figure:

Figure 16: MPLAB-X IDE Device Programming.

• Finally the programming process ends successfully and the application runs as shown in the following figure:

Figure 17: MPLAB-X IDE Application Running.

• Click into Pause button to debug the application as shown in the following figure:

Figure 18: MPLAB-X IDE Application Debug.

Additional Notes

T.B.D.