Problem with Arduino and Erika os
Posted: Thu Apr 27, 2017 1:18 pm
Hi everyone, I open this discussion because I have a problem with erika and Arduino.
First I apologize for the not perfect english ..
The problem is this:
I connected 3 leds that came in one after the other in the loop and in addition I connected a button to another led.
The LEDs follow the loop but I just want the button to light up and wait until the loop ends.
At the moment I push the button the LED lights up when the last led of the loop is off.
I used eclipse and I attached the project
Thank you all
----------------------------------------------------------------------------------------------------------------------------
Salve a tutti, apro questa discussione perchè ho un problema con erika e Arduino.
Il problema è questo:
Ho collegato 3 led che si accedono uno dopo l'altro in loop e in più ho collegato un pulsante ad un altro led.
I led seguono il loop ma vorrei che appena premo il pulsante il led si accendesse e non attenda la fine del loop.
Al momento se premo il pulsante il led si accende quando l'ultimo led del loop si è spento.
Ho usato eclipse e allego il progetto
Grazie a tutti
First I apologize for the not perfect english ..
The problem is this:
I connected 3 leds that came in one after the other in the loop and in addition I connected a button to another led.
The LEDs follow the loop but I just want the button to light up and wait until the loop ends.
At the moment I push the button the LED lights up when the last led of the loop is off.
I used eclipse and I attached the project
Thank you all
----------------------------------------------------------------------------------------------------------------------------
Salve a tutti, apro questa discussione perchè ho un problema con erika e Arduino.
Il problema è questo:
Ho collegato 3 led che si accedono uno dopo l'altro in loop e in più ho collegato un pulsante ad un altro led.
I led seguono il loop ma vorrei che appena premo il pulsante il led si accendesse e non attenda la fine del loop.
Al momento se premo il pulsante il led si accende quando l'ultimo led del loop si è spento.
Ho usato eclipse e allego il progetto
Grazie a tutti