Problem porting on TC275 AURIX Family

[WooHyuk]

Hello all~
I'm trying to adapt Erika Enterprise on TC275 AURIX board. I made an OO example - Task demo project and tried to build the project but I encountered some problems.
First, I heard that Erika Enterprise supports Tasking v4.0r1. But I have Tasking v4.1r1 and v4.3r3. Now, Windows -> preferences -> RT Druid -> OIL -> tricore I set Tasking v4.1r1 path. I upload the picture of this.
Second, I also set COMPILER_TYPE = TASKING in conf.oil
But if I build the project, the error occurs. I upload the picture of error contents.
Third, I also add the path of the Tasking Compiler path to the system path.
I don't know how can I solve this problem.
Is it because of the version of Tasking Compiler?

[paolo.gai]

Hi,

the path should not include "ctc\bin", if you look in the error that part is present twice.

PJ

[WooHyuk]

Thanks to reply. I changed the path but another problem has occurred. Please look up this error message and let me know how I can get through this problem!!

[e.guidieri]

Sorry but TASKING compiler for TriCore is not really supported by us. We don't have a valid license, we cannot provvide "continous integration" for that so these kind of bugs can happen.

I can guide you to patch the code if you will provvide a tested patch to apply to repository. The first step, if you want to do that, it is get a local checkout of the public repository.

http://erika.tuxfamily.org/wiki/index.p ... nly_access

Regards

[WooHyuk]

Oh, Thanks to reply. I understand that Tasking compiler for Tricore is not really supported by Erika Enterprise. You mean that if I patch the code then, it works normally right?
Anyway, I cannot understand how I can patch the code. Can you explain to me more detailedly? Also I have a question for you. I have Free Aurix Entry Tool Chain v4.6.5.0 from HighTec. I builded the project using that version of HighTec compiler but it doesn't work. It is said that the example project on TC275 can be builded with HighTec Compiler v4.6.3.1. So I think that it can be builded with v4.6.5.0 because it is higher version than v4.6.3.1. Is there a way that I can build the project with HighTec Compiler v4.6.5.0 ?

[e.guidieri]

Just yesterday an ERIKA's contributor provvided a patch for TASKING 4.3 for TriCore so maybe you could get the last snapshot of the repository (follow the instruction of previous link i gav you), and using it:

http://erika.tuxfamily.org/wiki/index.p ... n_RT-Druid

Hightec compiler should work, I think you aremaking some configuration mistake.

[WooHyuk]

First of all, I appreciate your response e.guidieri. I'm trying to solve the problem with Tasking Compiler the way you taught me. I have another question today. You told me that HighTec Compiler should work and there must be a mistake with path. So, I fixed the path and try to build but errors which I have never seen before have occurred. My HighTec GCC Compiler version is v4.6.5.0 and I checked that example project is builded successfully when I use Free Aurix Entry Tool Chain from HighTec. Please, Can you figure out this problem?

[WooHyuk]

Hello~ I have just tried what you told me e.guidieri. I wrote EE_OPT = "EE_TASKING_4_3"; and change COMPILER_TYPE to TASKING. It seems that it would be successful but at last, error has occurred. I really want to build it! Can you tell me how to solve this problem?

[e.guidieri]

About TASKING: Try to remove EE_OPT = "EE_TASKING_4_3"; As far as I can see the actual patch use this compiler by default, and maybe the patch could give some problem (but I don't really know, since I cannot test). If you have problem you should inspect makefile to figure out what's happening

About Hightec: Seems that what you found is a packaging error in Hightec compiler (already happened in the past versions), contact them sending the immage you attached here, and ask for a patch for header files.

Regards

[chris.kreuzberger]

Hi

Please remove
EE_OPT = EE_EXECUTE_FROM_RAM
since I didn't adept the linker script for that with the TASKING compiler.

(EEOPT=EE_BUILD_SINGLE_ELF is also not supported by the way.)

For the Hightec Compiler error:
Try using the applikation kit board which uses other SFR includes:
EE_OPT = "EE_APPKIT_TC2X5"; /* Use Applikation Kit TC2X5 */
EE_OPT = "EE_USE_DISPLAY"; /* Use Display Driver */
EE_OPT = "EE_USE_BUTTONS"; /* Use Button Driver */
EE_OPT = "EE_USE_LEDS"; /* Use Led Driver */

(Remove BOARD_DATA)

Best regards,
Chris

[WooHyuk]

Thanks to all, I finally succeed to build an example on Infineon TC275!! I'm trying to develop CAN Communicating application. Is there any CAN API about TC275 in Erika Enterprise?

[paolo.gai]

As long as I know currently there is not. But there is for PPC Leopard.

If you do something I suggest to try to be similar as much as possible to teh AUTOSAR MCAL specifications...

PJ